专业术语中英文对照表
Reducing coupling 变径接头
T-coupling T型管接头
T-piece 三通
Flat steel bar 扁钢棒
PTFE strip 聚四氟乙烯带
Reducing welding cone 焊接锥体
Weld-on pipe coupling 焊接式管接头
Sleeve 套筒
Straight male stud 直通外螺柱
Union nut 管接螺母
Cap 管帽
Socket 套管
Ring gasket 密封圈
Water trap 脱水器
Edger 立辊
Plate Mill 中厚板轧机
Crop Shears 切头剪
Roughing Mill 粗轧机
Finishing Mill 精轧机
Trimming Shear 切边剪
Coiler 卷取机
Media systems 介质系统
Mill piping and accessories 轧机管线和附件
Hot Coil conveyor system 热卷运输系统
Rollers, grids, bearing blocks, motor base
辊子、护板，轴承块，电机底座
Approach roller table 入口辊道
Flexible couplings (tire type) 弹性联轴节（轮箍式）
Sealings 密封
Bearings 轴承
Grease lubrication 油脂润滑
Piping 管路，缩孔
Emulsion spray 乳化剂喷嘴
Roller 辊子
Barrel 桶，卷筒
Ingot cleaning device 铸锭清洗装置
Cleaning hood 清洗罩
hydraulic cylinder for top header 上集管液压缸
Emulsion piping for headers 集气管乳化液管线
Hoses for emulsion piping 乳化液管线软管
Control valves 控制阀
Spray nozzles 喷嘴
Bearings 轴承
Bearings for guide rollers 导辊轴承
Wear plates 耐磨板
Rack and pinion 齿条和齿轮
Hydraulic cylinder 液压缸
Vertical edger 立辊
Edger base plates 立辊底板
Edger mill frame assembly 立辊轧机框架装配
Track rails, spacers 轨道、垫块
Edger, Roughing Mill and Crop Shears立辊、粗轧机和切头剪
Roughing mill entry equipment粗轧机入口设备
Roughing mill approach roller table粗轧机入口辊道
5,600 mm approach roller table 5600 mm 入口辊道
4,100 mm approach roller table 4100 mm 入口辊道
Ingot cleaning device 铸锭清洗装置
Entry operating roller table in front of the edger 立辊前入口操作辊道
Entry side guides in front of the edger立辊前侧导卫
Vertical edger立辊
Edger base plates立辊底板
Edger mill frame assembly立辊轧机框架装配
Feed roller机架辊
Roll balancing轧辊平衡
Mechanical screw down system机械压下系统
Edger roll chocks立辊轴承座
Edger roll bearings 立辊轴承
Edger rolls with labyrinth rings立辊带有迷宫环
Edger main drive equipment立辊主传动设备
Gear unit减速机
universal drive spindles incl sleeves (motor side)
万向轴包括套管（电机侧）
universal drive spindles incl sleeves (rollside)
万向轴带有套管（辊侧）
Wobbler holding device接轴头把持装置
Vertical edger maintenance platform立辊维修平台
Edger stand piping立辊轧机管线
Auxiliary equipment edger立辊的辅助设备
Dismantling device for edger rolls立辊拆卸装置
Dismantling device for edger gear box立辊减速机拆卸装置
Dismantling device for mech. screw down机械压下拆卸装置
Dismantling device for balancing cylinder incl.Lifting ropes
平衡缸拆卸装置包括提升钢丝绳
Dismantling Device for edger main drive spindle
立辊主传动轴拆卸装置
Equipment between Edger and Roughing Mill
立辊和粗轧机之间设备
Entry operating roller table in front of the roughingmill (Turn Table) 粗轧机前入口操作辊道（回转辊道）
Entry side guides in front of RM粗轧机前入口侧导卫
Roughing mill equipment粗轧机设备
Bed plates底板
Roughing mill housing粗轧机牌坊
Back-up roll balancing支撑辊平衡
Mechanical screw down system机械压下系统
Hydraulic AGC cylinder for Roughing Mill粗轧机液压AGC缸
Work roll bending / balancing system工作辊顶弯/平衡系统
Work rolls工作辊
Work roll bearings工作辊轴承
Work roll chocks工作辊轴承座
Work roll stripper工作辊推板
Work roll brushes工作辊刷辊
Back-up rolls支撑辊
Back-up roll bearings支撑辊轴承
Back-up roll chocks支撑辊轴承座
Work roll change rails工作辊换辊轨道
Back-up roll change rails支撑辊换辊轨道
Entry and delivery strip guides入口和出口铝板导卫
Work roll cooling at the entry and delivery guides
工作辊冷却，在入口和出口导卫上
Breast rollers机架辊
Drive spindles传动轴
Drive spindle balancing传动轴平衡
Work roll changing device工作辊换辊装置
Back-up roll changing device支撑辊换辊装置
Mill stand piping轧机管线
Mill platform轧机平台
Mill side covers, cladding轧机侧盖，围板
Fume exhaust equipment at the mill轧机上排烟设备
Fume exhaust system排烟系统
Fire extinguishing pipes消防管线
Mill stand cleaning pipes轧机清洗管线
Auxiliary equipment Roughing Mill粗轧机辅助设备
Top Back-up roll changing stool上支撑辊更换凳
Back-up roll lifting device支撑辊吊具
Work roll lifting device incl. lifting ropes工作辊吊具包括钢丝绳
Dismantling device for breast rollers机架辊拆卸装置
Changing device for hydraulic gap adjustment cylinder
液压辊缝调节缸更换装置
Lifting tackle for mill housing轧机牌坊吊具
Table roller cleaning device辊道清洗装置
Roughing Mill exit side equipment粗轧出口设备
Roughing Mill exit side operating roller table粗轧机出口侧操作辊道
Roughing Mill exit side guide粗轧机出口侧导卫
Roughing Mill exit roller table粗轧机出口辊道
Crop shear T1.2 equipment切头剪 T2.1设备
Heavy crop shear T1.2重剪T1.2
Heavy crop shear T1.2 base plate重剪T1.2底座
Scrap push-off device废料推出装置
Scrap removal system废料移出系统
Scrap pallets废料托盘
Scrap marking device废料打号装置
Lowerable roller table in front of T1.2
T1.2剪前升降辊道
Shifting and lowerable roller table behind shear T1.2
T1.2剪后移动和升降辊道
Heavy plate unloading device厚板卸板装置
Plate marker厚板打号机
Connecting roller tables连接辊道
Connecting roller table section 1 连接辊道第1段
Connecting roller table section 2连接辊道第2段
Light Crop shear T2.2 equipment轻剪T2.2设备
Entry side guides in front of crop shear T2.2
T2.2剪前入口侧导卫
Light crop shear T2.2轻剪T2.2
Light crop shear T2.2 base plate轻剪T2.2底板
Scrap push-off device废料推出装置
Scrap removal system废料移出系统
Scrap pallets废料托盘
Scrap marking device废料打号机
Sample collecting样品收集
Lowerable roller table in front of T2.2
T2.2剪前升降辊道
Shifting and lowerable roller table behind shear T2.2
T2.2剪后移动和升降辊道
Light crop shear exit roller table轻剪出口辊道
Light plate unloading device轻板卸板装置
Plate marker铝板打号机
Finishing Mill, Trimming Shear and Coiler精轧机、切边剪和卷取机
Finishing Mill entry side equipment精轧机入口设备
Finishing mill entry roller table精轧机入口辊道
Tilting entry roller table倾动入口辊道
Finishing mill entry side guides精轧机入口侧导卫
Transfer bar cooler过渡坯冷却装置
Finishing Mill equipment (F1 - F5)精轧机设备（F1 - F5）
Bed plates底板
Mill housing with separators轧机牌坊和连接横梁
Upper back-up roll balancing system上支撑辊平衡系统
Hydraulic screw down system液压压下系统
CVC PLUS shifting and bending system CVCplus窜辊和弯辊
Work rolls工作辊
Work roll bearings工作辊轴承
Work roll chocks工作辊轴承座
Work roll stripper工作辊推板
Brushing device - work roll工作辊刷辊装置
Back-up rolls支撑辊
Back-up roll bearings支撑辊轴承
Back-up roll chocks支撑辊轴承座
Back-up roll wiper (F5)支撑辊擦辊器
Work roll change rails in the mill stand轧机内部工作辊换辊轨道
Pass line adjustment system轧线调整系统
Back-up roll change rails支撑辊换辊轨道
Entry and delivery guides入口和出口导卫
Work roll cooling equipment工作辊冷却设备
Entry and exit tables with entry side guides入口和出口辊道带有侧导卫
Strip tension measuring roller带材张力测量辊
Work roll changing device工作辊换辊装置
Back-up roll changing device支撑辊换辊装置
Mill stand piping轧机管线
Mill stand platform轧机平台
Mill stand cladding轧机围板
Fume exhaust equipment at the mill stands轧机排烟设备
Fume exhaust system排烟系统
Fire extinguishing pipes消防管线
Mill stand cleaning pipes轧机清洗管线
Auxiliary equipment for finishing mill equipment精轧机辅助设备
Back-up roll changing stool支撑辊更换凳
Work roll lifting device incl. Ropes工作辊吊具包括钢丝绳
Back-up roll lifting device支撑辊吊具
Changing device for hydraulic gap adjustment cylinder
液压辊缝调节缸更换装置
Lifting device for mill housings轧机牌坊吊具
Dismantling device for CVC Blocks CVC块拆卸装置
Finishing Mill Main drive equipment精轧机主传动设备
Gear type mill drive spindles齿形轧机传动轴
Finishing Mill exit equipment精轧机出口设备
Emulsion blow-off system and cross spray乳化液吹扫系统和侧喷
Side trimming shear切边剪
Side trimming shear drive切边剪传动
Side trimming scrap removal system切边剪废料移出系统
Scrap conveyor belt 2 废料运输带
Scrap box transfer system 废料箱传输系统
Scrap bucket废料筐
Strip deflecting system带材偏导系统
Pinch roll unit with guides 夹送辊带侧导卫
Steel structure belt wrapper exit side
Support for thickness/profile measurement device厚度/板型测量装置支架
Support for surface inspection device表面检查装置支架
Coiler gear box卷取机减速机
Coiler gear box base frame卷取机减速机底座
Outboard support bearing外支撑轴承
Hot strip coiler mandrel热轧带卷卷取机芯轴
Combined belt wrapper组合助卷机
Belt wrapper side-shifting unit助卷机横移装置
Mill Coil car inclusive track way轧机卷车包括轨道
Spool Manipulator套筒机械手
Auxiliary equipment for exit side出口侧设备辅助设备
Lifting device for down coiler mandrel incl. Ropes
卷取机芯轴吊具，包括钢丝绳
Knife grinding tools for side trimming shear knives切边剪剪刃磨削工具
Platform for mandrel access芯轴维修平台
Fluid systems流体系统
Hydraulic systems液压系统
Low pressure hydraulic system roughing mill粗轧机液压低压系统
Pump station泵站
Accumulators units蓄能器装置
Valve units阀站
High pressure hydraulic system roughing mill粗轧机高压液压系统
Low pressure hydraulic system finishing mill精轧机低压液压系统
Nitrogen filling unit充氮装置
Hydraulic system filling units液压系统加油装置
Pneumatic system气动系统
Air compressor station空压站
Oil lubrication systems稀油润滑系统
Oil lubrication system roughing mill粗轧机稀油润滑系统
Oil lubrication system finishing mill精轧机稀油润滑系统
Centrifugestations for lubrication systems润滑系统油水分离站
Emulsion systems乳化液系统
Emulsion system roughing mill粗轧机乳化液系统
Emulsion system finishing mill, schematic drawings精轧机乳化液系统
Oil-air lubrication systems油气润滑系统
Oil air lubrication system roughing mill 粗轧机油气润滑系统
Oil air lubrication system finishing mill 精轧机油气润滑系统
Grease lubrication system 干油润滑系统
Kerosene spraying system for Finishing Mill 精轧煤油喷射系统
Mill piping and accessories 轧机机上管线和附件
Cooling water, waste water, compressed air andinstrument air
冷却水、废水、压缩空气和仪表空气
Sump pumps and accessories污水泵和附件
Interconnecting piping中间管线
Hot Coil conveyor system热卷运输系统
Single Shifting Roller Table单移动辊道
Double Shifting Roller Table双往复辊道
Coil Lifting Car带卷提升车
Pallet Roller Tables托盘辊道
Pallet for HSM 热卷托盘
Single Shifting Roller Table/Double shifting RollerTable
Automatic strapping machine自动打捆机
Weighing scale称重装置
Automatic marking machine自动打号机
Movable Platform移动平台
Strip inspection station带材检查站
Strip centering device带材对中装置
Inspection reel检查卷筒
Tail Hold Roll
Carry over table过渡台
Coil peeler铲头器
Pinch roll and bending roller unit with baseframe
夹送辊和顶弯辊装置，带有底座
Crop Shear切头剪
Inspection table检查台
Shiftable Lifting table移动提升台
Scrap Pallets废料托盘
