This test fully demonstrated the outstanding performance and unique advantages of our Aqua C2.5 5MWh Energy Storage System (the test video is attached at the end of the article):
Challenge Highest Difficulty: Industry's First Active Ventilation and Explosion Suppression Solution.
Highly Reliable Redundant Duct Design.
Continuous Passive Protection via Natural Exhaust.
Explosion Venting and Pressure Relief Protection.
Directional Flame Guidance.
Proactive Cell Sensing & Rapid Directional Pressure Relief.
Fastest Risk Response & Optimal Control Effectiveness.
A/B/D Enclosures Deployed per 20MWh Station Layout: Side-by-Side, Back-to-Back.
Challenge Minimal Enclosure Spacing: Redefining ESS Layout Standards.
Thermal Runaway Simulation via Heater Activation on Test System.
Active Ventilation & Suppression: Early-Stage Flammable Gas Evacuation via Thermal Pressure Differential.
Fixed-Angle Louvers for Directional Flame Guidance (Preventing Adjacent Ignition).
Full Certification Witnessing by CSA Group.
Exceptional Flame Resistance & Thermal Insulation.
Ignited Enclosure A Did Not Trigger Valve Activation/Thermal Runaway in Adjacent Systems.
Adjacent Battery Enclosures Structurally Intact.
Insulation Layer & Internal Components: Physically Undamaged, Functional.
Peak Internal Flame Temp. in Enclosure A: >1300°C.
Peak Temp. in Adjacent Enclosure C: 80.71°C.
59h10min Extreme Condition Burn Test: Ultra-Long Duration Validation.
Full Simulation of Firefighting System Failure Scenario.
Complete Recreation of Extreme Fire Progression to Natural Attenuation.
Burned Enclosure Maintained Structural Integrity: Superior Rigidity & Pressure Resistance.