U.S. Silica Holdings has announced the introduction of InnoProp PLT, a newly formulated resin-coated proppant designed specifically for enhancing the recovery of oil and gas in low-temperature reservoirs.
美国U.S. Silica控股公司宣布推出它们的InnoProp PLT产品——新配方的树脂涂层支撑剂。该支撑剂是专门为提高低温储层油气采收率所研发设计的。
Independent test results show this proprietary polyurethane-based formula delivers best-in-class bond strength, crush resistance and conductivity. U.S. Silica's network of transload facilities served by Class I railroads allows InnoProp PLT to be delivered to locations within 100 miles of more than 80% of today's activedrilling rigs.
独立试验结果表明这项专门的聚氨酯配方的支撑剂能够提供一流的胶结强度、抗压强度和导流能力。美国U.S. Silica公司的一级铁路运输网络能够保证InnoProp PLT支撑剂运送至距离铁路网络100英里内的多余80%的目前活跃的钻井平台。
"With the challenges of today's oil and gas pricing environment, completion engineers are seeking products that optimize production of hydrocarbons,” said Don Weinheimer, V.P. and general manager of U.S. Silica's oil and gas division. “According to published test data, InnoProp PLT outperforms all other resin-coated products designed for low-temperature reservoirs, bonding without the use of an activator down to 70°F bottom-hole static temperature. It significantly reduces proppant flowback and provides increased conductivity which enhances hydrocarbon recovery. Furthermore, InnoProp PLT has the ability to re-bond, helping ensure continued performance under cyclic stress."
"面对目前低迷的油气价格环境的挑战，完井工程师正在努力寻求能够优化碳氢化合物产量的产品。”美国U.S. Silica公司油气分部的副总裁和总经理Don Weinheimer表示：“根据公开的测试数据，InnoProp PLT的性能大大优于其它所有为低温油藏所开发的树脂涂层支撑剂，而且在70°F的井底静止温度下不需要使用活化剂就可以。它大大降低了支撑剂的回流量，并且能够增大导流能力，从而提高采收率。此外，InnoProp PLT支撑剂具有再次黏合的能力，可以在周期应力下保持持续的高性能表现。"这项专门的聚氨酯配方的支撑剂能够提供一流的胶结强度、抗压强度和导流能力。
(来源：金正纵横翻译公司)
