青岛创芯卓实光电科技有限公司
2019
交流定频控制器规格书
Model Name: HVAC220V15A0
GTE 签名 GTE SIGNATURE |
顾客承认签名 CUSTOMER’S APPROVAL |
||||
DWN. |
名字 NAME |
||||
作成者 |
承认日 DATE |
||||
CHKD. |
名字 NAME |
||||
审查者 |
承认日 DATE |
||||
名字 NAME |
|||||
承认日 DATE |
|||||
APPD. |
名字 NAME |
||||
承认者 |
承认日 DATE |
||||
1.主要电气参数规格Main electrical parameters specifications：
项目Item |
规格Specification |
适用对象 Application Object |
交流定频压缩机 AC Constant Frequency Compressor |
输入电压（额定） Input Voltage (Rated) |
220VAC 50Hz |
输入电流（最大） Input Current (Max) |
15A有效值RMS |
输入电压范围 Input Voltage Range |
90VAC ～264VAC |
最大输入功率 Max Input Power |
3300W |
冷却方式 Cooling Model |
自然风冷 Natural Air Cooling |
工作环境 Working Condition |
温度 Temperature：-20～65℃ 湿度 Humidity：5～95% |
保存环境 Storage Condition |
温度 Temperature：-25～70℃ 湿度 Humidity：5～95% |
保护功能 Protection Function |
(1) 过电流保护 Over Current Protection |
(2) 过欠电压保护 Over/Under Voltage Protection |
|
接口方式 Interface Model |
Modbus通讯方式 Modbus Communication |
控制板尺寸（L x W x H) Dimension of Control Board |
145×110 ×25（mm） |
驱动板尺寸（L x W x H) Dimension of Drive Board |
95×48 ×40（mm） |
2. 方案规格Solution Specifications：
2.1 输入电源 Input supply
额定电压：220VAC（50/60Hz）
电压范围：90VAC～264VAC
2.3 保护功能 Protection function
2.3.1 欠电压保护
Under voltage protection
2.3.2 过电压保护
Over voltage protection
2.3.5 电机过负荷电流保护
Motor current over load protection
2.4 环境条件 Environmental condition
使用温度范围 Temperature：-20～65℃
保存温度范围 Temperature：-25～70℃
使用湿度 Humidity：5～95%
保存湿度 Humidity：5～95%
2.5 安装尺寸 Dimensions
图1 Control Board Dimension
图2 Drive Board Dimension
图3 HMI Board Dimension
2.6 接口说明 Interfaces
图4 Control Board Interface
图5 Drive Board Interface
图6 HMI Board Interface
控制板接口 Control Board Interfaces |
|||
分类 Classification |
接口名称 Name |
规格 Spec |
说明 Description |
交流电源输入 AC power input |
L-line |
6.3mm |
输入电源火线 AC power L line |
N-line |
6.3mm |
输入电源零线 AC power N line |
|
PE-line |
6.3mm |
输入地线(接机壳) AC power PE line |
|
温度传感器 Temperature sensor
|
T2 |
2.54mm*2 |
回风温度传感器 Return air temperature sensor |
T3 |
2.54mm*2 |
蒸发盘管温度传感器 Evaporation coil temperature sensor (Reserved) |
|
T4 |
2.54mm*2 |
冷凝盘管温度传感器 Condenser coil temperature sensor (Reserved) |
|
T5 |
2.54mm*2 |
环境温度传感器 Ambient temperature sensor (Reserved) |
|
T6 |
2.54mm*2 |
预留 Reserved |
|
T7 |
2.54mm*2 |
预留 Reserved |
|
电流检测 Current detection |
J4 |
2.54mm*2 |
内风机电流互感器 Internal fan CT |
J5 |
2.54mm*2 |
外风机电流互感器 External fan CT |
|
J6 |
2.54mm*2 |
预留 Reserved |
|
外部告警输入 External alarm input |
J8 |
2.54mm*2 |
外部告警输入1 External alarm input 1 |
J7 |
2.54mm*2 |
外部告警输入2 External alarm input 2 |
|
J3 |
2.54mm*2 |
外部告警输入3 External alarm input 3 |
|
风机控制 Fan control |
L02 |
8mm*2 |
内风机（220VAC） Internal fan |
L03 |
8mm*2 |
外风机（220VAC） External fan |
|
压缩机/加热器控制（配合驱动板使用） Compressor/Heater control(Used with drive board) |
J24 |
6.3mm |
驱动板火线 Drive Board L line |
J27 |
6.3mm |
压缩机零线 Compressor N line |
|
J28 |
6.3mm |
加热器零线 Heater N line |
|
J12 |
2.54mm*5 |
压缩机/加热器控制接口 Compressor/Heater control interface |
|
干接点告警 Dry contact alarm |
J13 |
4mm*3 |
温度告警输出 Temperature alarm |
J14 |
4mm*3 |
湿度告警输出 Humidity alarm |
|
J15 |
4mm*3 |
总告警输出 General alarm |
|
温湿度变送 Temperature & humidity transmission |
J19 |
2.54mm*2 |
温度4~20mA输出 Temperature transmission |
J20 |
2.54mm*2 |
湿度4~20mA输出 Humidity transmission |
|
变压器 Transformer |
J21 |
4mm*4 |
变压器输出 Transformer output |
J22 |
8mm*2 |
变压器输入 Transformer input |
|
湿度传感器 Humidity sensor |
J10 |
2.0mm*4 |
温湿度传感器接口 Humidity sensor interface |
通信 Communication |
J1 |
2.54mm*2 |
RS485通信接口 RS485 interface |
手操器 HMI |
J30 |
2.54mm*4 |
手操器接口 HMI interface |
蓝牙 Bluetooth |
J23 |
2.54mm*4 |
预留蓝牙接口 Bluetooth Interface(Reserved) |
驱动板接口 Drive Board Interfaces |
|||
分类 Classification |
接口名称 Name |
规格 Spec |
说明 Description |
交流电源输入 AC power input |
L-line |
6.3mm |
输入电源火线 AC power L line |
压缩机/加热器控制 Compressor/Heater control |
AC-Out1-3 |
6.3mm |
压缩机火线 Compressor L line |
AC-Out2-3 |
6.3mm |
加热器火线 Heater L line |
|
J12 |
2.54mm*5 |
控制板接口 Control board interface |
|
手操器接口 HMI Board Interfaces |
|||
分类 Classification |
接口名称 Name |
规格 Spec |
说明 Description |
控制板接口 Control board interface |
J1 |
2.54mm*4 |
电源和通信接口 Power supply & communication |
3. 应用实例Examples of Communication Applications
图7 控制板+驱动板+手操器连接
Figure 7 Control Board + Drive Board + Manipulator Connection
图8 应用产品展示
Figure 8 Application Product Display
3.1 温度采集 Temperature acquisition
该主控板上预留有6个外接温度传感器接口，接口通过延长线与传感器相连，检测精度可达±0.5℃。通过丰富的温度传感器接口可采集多路温度，使温度控制更精确。
There are six external temperature sensor interfaces reserved on the main control board. The interface is connected with the sensor through extension line, and the detection accuracy can reach (+0.5 C). Multi-channel temperature can be collected through abundant temperature sensor interface, which makes temperature control more precise.
3.2 湿度采集 Humidity collection
该主控板上预留1路湿度传感器接口，可选择板载或者外接两种方式，精度可达±3%，用户可根据需要增加湿度检测功能，以便进行湿度监测和除湿等操作。
A humidity sensor interface is reserved on the main control board, and two modes of on-board or external connection can be selected. The accuracy can reach 3%. Users can add humidity detection function according to their needs for humidity monitoring and dehumidification operation.
3.3 风机调速 Fan speed regulation
该主控板可根据系统需要，对交流风机进行调速，可以更加节能和精确控温。
The main control board can adjust the speed of the AC fan according to the needs of the system, which can save energy and control temperature more accurately.
3.4 外部告警输入 External alarm input
该主控板含有3路外部告警干接点输入接口，可用于门禁，水浸，烟雾，压力等检测。
The main control board contains three external alarm dry contact input interfaces, which can be used for access control, water immersion, smoke, pressure and other detection.
3.5 电流/电压检测 Current/Voltage Detection
该主控板不但可以检测风机，压缩机/加热器的电流，还可以检测交流输入电压，风机电流精度可达±0.05A，压缩机/加热器电流精度为±0.2A，电压精度为±3V，可有效保护设备各部件，达到安全可靠。
The main control board can not only detect the current of the fan, compressor/heater, but also detect the AC input voltage. The current precision of the fan can reach (+0.05A), the current precision of the compressor/heater is (+0.2A), and the voltage precision is (+3V), which can effectively protect the components of the equipment and achieve safety and reliability.
3.6 干接点告警输出 Dry Contact Alarm Output
该主控板共有3路干接点告警输出，根据采集的信息和设置的参数，可产生相关告警，并可通过干接点信号输出，方便监控。
The main control board has three trunk contact alarm outputs. According to the collected information and the set parameters, the related alarm can be generated, and the trunk contact signal can be output to facilitate monitoring.
3.7 温湿度电流变送 Temperature and humidity electrorheological transmission
该主控板无需外接温湿度变送板，可直接进行4~20mA的电流输出，温湿度的变送范围可通过显示控制板或上位机进行修改。
Without external temperature and humidity transducer, the main control board can directly output current from 4 to 20 mA. The range of temperature and humidity transducer can be modified by display control board or upper computer.