Is your shower head not performing like it used to? Over time, mineral deposits can build up in your shower head. This can cause the nozzles to squirt water in all directions or clog up completely, leaving you with poor water pressure or low flow.
Here are our top tips (listed from easiest to more complex) to help get your shower head back to peak performance.
Rub the Nozzles
Source: Internet
Many shower heads have flexible rubber nozzles. You can dislodge mineral buildup in these nozzles by simply massaging each nozzle with your finger. You can also try gently scrubbing the nozzles with a toothbrush.
Soak the Shower Head in Vinegar
There are a couple ways to do this:
If you prefer to leave the shower head attached to the pipe coming out of the wall, you can fill a plastic bag with vinegar and wrap it around the shower head.
Secure the bag around the head with a rubber band, tape, or a twist tie. Leave the bag around the shower head for a few hours. Remove the bag and turn on the water for a few minutes to clear the vinegar out of the shower head.
Source: Internet
If you don’t mind removing the head from the shower pipe, you can submerge the shower head in a container full of white vinegar.
Let the shower head soak in the vinegar for a few hours. Re-attach the shower head to the shower pipe and run water through the head for a few minutes to clear out the vinegar.
Clean the Filter Screen
To clean the filter screen, you may need to consult the shower head instruction manual. If you didn’t keep the manual, don’t panic! You can usually find it on the brand’s website or by contacting the customer service department.
In general, the filter screen is located in the part of the shower head that connects to the pipe. You will need to remove the shower head from the pipe to get to the filter screen.
Source: Internet
In most brand name shower heads, the filter screen can be removed by gently brushing the filter out. Or you can use tweezers/needle-nose pliers to get the screen out of the pivot ball.
Once the filter screen is out of the pivot ball, run the screen under water for a few minutes to flush out any buildup. You can also use a toothbrush to gently brush out mineral deposits.
Source: Internet
Place the filter screen back into the pivot ball and re-install the shower head to the shower pipe.
We all need to clean the shower head, but a good shower head only requires your simple cleaning operation. JOMOO SKIN CARE HAND SHOWER has excellent performance at this point. At first, it uses electroplating technology for no water stains leaving.
JOMOO SKIN CARE HAND SHOWER
In order to achieve the goal of such level 10 electroplating standard, smooth surface, durable and corrosion resistant, JOMOO makes it through automated robot polishing, multi-layer electroplating and the surface layer passed spray test for 36 hours.
JOMOO SKIN CARE HAND SHOWER
Furthermore, because of the new silicone descaling, it is easy and quick for us to clean JOMOO SKIN CARE HAND SHOWER. The shower spout is made of high-quality liquid silicone material, which has excellent flexibility and high temperature resistance. After washing, you only need to rub it gently with hands to remove dirt.
JOMOO SKIN CARE HAND SHOWER
Surprisingly, this is not its most prominent feature yet. It can achieve the effect of simple skin care by the built-in body lotion cartridge.
No matter before or after use, an excellent shower can bring more convenience. Hope you could enjoy a more comfortable life that you have never encountered.
source：bhg.com
