天下难事，必做于易
天下大事，必做于细
The world is difficult, will do in easy;
World affairs, will be done in fine.
安装篇
PREFACE // 前 言
稍纵即逝的细节，具有彰显事物本质的功能，是对“可见一斑”的诠释。而对人来说，细节往往反映了行为水准。人生由无数细节串连而成，在这些细节中，是体现真善美的居多，还是暴露假恶丑的居多，决定了人生是光彩还是灰暗，是被赞誉还是遭贬斥。故此，做人不妨从细节做起，服务亦当如此。
都说门窗是“三分产品、七分安装”，小V今天就陪同各位看官一起来看一看维卡斯的安装服务！
NO.1
统一着装
UNIFORM DRESS
统一着装：VKASI定制工装，定位定点放置、检查相关安装物料及工具。
Uniform dress: VKASI customized labor protection tooling, with safety helmet, and positioning points to place, check relevant installation materials and tools.
NO.2
货品清点核对
INVENTORY CHECK
货品清点核对：产品数量及尺寸核对。
Goods please check: product quantity and size check.
NO.3
保护铺设
PROTECT THE LAYING
保护铺设：地膜保护现场环境、转角保护确保搬运过程安全。
Protection laying: plastic film to protect the site environment, corner protection to ensure the safety of the handling process.
NO.4
产品进场
PRODUCT COMES INTO PLAY
产品进场：定位定点，轻拿轻放，注意角度，防止倾倒。
Product approach: positioning point, handle gently, pay attention to Angle, prevent dumping.
NO.5
洞口清理
HOLE CLEANING
洞口清理：除尘、湿润墙体、涂刷专用防水漆。
Hole cleaning: dust removal, wet wall, coated with special waterproof paint.
NO.6
标出安装三线
MARK THE INSTALLATION LINE
标出安装三线：进出线、垂直线、居中线；并再次核对产品与洞口尺寸，以确保安装无误。
Mark the installation of three lines: incoming and outgoing line, vertical line, center line; And check the size of the product and the hole again to ensure correct installation.
NO.7
窗框上墙
WINDOW FRAME ON THE WALL
窗框上墙：放置定位气垫每30CM放置一个，窗框上墙后放置VKASI专用承重垫块，并打VKASI定制固定螺丝，间距≤50CM一颗。
The window frame on the wall: placed positioning cushion every 30CM placed a window frame on the wall placed VKASI special load-bearing pad, and play VKASI custom fixed screws, spacing ≤50CM a.
NO.8
水平复查
LEVEL OF REVIEW
水平复查：窗框固定后，用水平仪复查。要求固定位、开启位横平竖直。
Level review: After the window frame is fixed, use a level to review. The fixed position and open position are required to be horizontal and vertical.
NO.9
缝隙填充
GAP FILLING
缝隙填充：使用VKASI定制门窗专用填缝剂对窗框和墙体缝隙进行填充，并完成美缝和收口工作以增加门窗整体的美观性、稳定性和水密性。
Gap filling: Use VKASI custom special sealant for doors and Windows to fill the window frame and wall gaps, and complete the seams and closing work to increase the overall beauty, stability and water tightness of doors and Windows.
NO.10
外框防水胶
OUTER FRAME WATERPROOF GLUE
外框防水胶：VKASI使用德国瓦克聚氨酯防水嵌缝密封胶，更防水、更牢固、更环保。
Outer frame waterproof sealant: VKASI uses German Wacker polyurethane waterproof caulking sealant, which is more waterproof, more firm and more environmentally friendly.
NO.11
玻璃安装
GLASS INSTALLATION
玻璃安装：每间隔15CM放置领士玻璃垫片，LOGO位置统一；使用德国TPE环保玻璃胶条/手工打德国瓦克中性硅酮密封胶，要求不能有截断，保证平整美观。
Glass installation: Steer glass spacers should be placed every 15CM, and the LOGO position should be uniform. The use of German TPE environmental protection glass rubber strip/manual German Wacker neutral silicone sealant, no truncation requirements, to ensure smooth and beautiful.
NO.12
五金执手安装
HARDWARE HANDLE INSTALLATION
五金执手安装：反复启闭测试，调试至最佳状态。要求无异响，无卡顿，无摇晃。
Holding by Damashii: repeatedly open and close the test, debugging to the best condition. No noise, no stalling, no shaking.
NO.13
成品保护
FINISHED PRODUCT PROTECTION
成品保护：VKASI定制玻璃保护膜、型材保护膜、执手保护套。要求不留死角，全方位保护。
VKASI custom glass protective film, profile protective film, handle protective cover. Require no dead Angle, full - range protection.
NO.14
现场清理
CLEARANCE OF SITE
现场清理：清除所有安装物品及杂物。要求整洁、整齐、舒心。
Persons On-site cleaning: Remove all installed items and clutter. Neat, tidy and comfortable.
NO.15
产品交付
PRODUCT DELIVERY
产品交付：向业主讲解使用及养护须知。要求回执客户安装满意度及意见征询表。
Persons Delivery: Instruction to owner on usage and maintenance. Request return receipt of customer installation satisfaction and consultation form.
NO.16
电话回访
TELEPHONE PAYS A RETURN VISIT
电话回访：电话回访客户，资料归档。
Persons call-back Persons: Call-back customers, data archiving.
PERORATION // 结 语
综上，谢谢各位的持续关注，维卡斯丨细节诠释品质系列就结束啦。更多细节请到维卡斯成都生产基地详细了解！
-THE END-
图片整理来源于网络（侵删）
