Hot summer has passed, the temperature turns gradually cool, climate changes clearly. In the shift season, forklift should be paid particular attention to maintenance. GOODSENSE forklift recommend forklift maintenance should do the following:
One. vehicle outside maintenance
As for autumn have more morning and evening dew, forklifts surfaces tend to be damp, if they have obvious scratches should be done painting in time to avoid scratch part corroded. As summer rain acid corrosion and glare of direct sunlight in the summer, body paint will oxidize, at the time of the season, GOODSENSE suggest better do one time forklift cleaning and paint repair.
Two. Tire maintenance
Tires play a decisive role during forklift safety driving,. In the summer, due to the high temperature, should always check the tire pressure, must not make the tire pressure too high, otherwise, there will be burst danger, but in the autumn, the temperature is relatively low, the tire need add pressure to keep it in the pressure range, at the same time should also check whether the tire have scratch, because the rubber in fall and winter is harden, more brittle, tire is easy burst and puncture,should always clean up the tire tread dusts.
Three. Engine maintenance
Check the engine oil, brake fluid and anti freeze, check whether oil is sufficient and metamorphism, whether it is in change cycle, the oil is a blood of vehicle,during the replacement period must be replaced to ensure the smooth oil.
Four. Brake system maintenance
In autumn, the temperature have big difference between day and night, easily lead to body parts of expansion and shrinkage deformation, should always check whether the brake is weak, deviation, force changes of brake pedal pedal, should do the whole braking system pipeline parts when necessary.
Five. The warm air fan and pipeline maintenance
If your forklift configured pipeline or warm air fan, after a summer of operation, or for the preparation of upcoming winter, autumn is the most suitable time for inspection of these devices whether exhaust air exits normal or not, the line is old or not and so on, should be resolved in a timely manner if have such problem。.
Six. The air inlet and air inlet grille maintenance
To check whether these parts have dust, can use compressed air to blow away the dust , in addition, in the engine cooling condition, can use the water gun washing those parts from the inside to the outside.
Seven. Air conditioning maintenance
If your forklift truck equipped with air conditioner, the air-conditioner will often overload in hot summer, in addition, due to the summer rain, it is easy to make the condenser corrosion for a long time to shorten the service life of the air conditioner, so please check the state of air conditioner.
Eight. Battery maintenance
Electrode wiring connection of vehicle battery is where the main problem incurs, must be cleaned in time if found to have green oxide electrode wiring, the green oxide will cause the generator power shortage and battery scrap when serious.
Nine. Cab maintenance
Northern China is dry weather full of heavy dust in autumn, please clean the dust in the cab, avoid dust deposition into the instrument precision parts to affect the forklift performance . Should often open the window, keep the air circulation, to ensure clean air in the forklift that is equipped with cabin.
Ten. Chassis maintenance
Usually, the owners are negligent in the care of the chassis, when there is leakage, deformation of the chassis, the chassis has been rusting. For this, you should periodically check the forklift chassis. In addition, the pivot and rail due to invasion of the sand and wash of forklift is easy to rust, open and closed will be appears the abnormal sound, such questions can be easily solved by just putting anti rust oil on time.
