|
|
任洪庆, 董九志, 梅宝龙, 等. 三维四向C/C预制体压实规律与高精度控制策略研究. 固体火箭技术, 2024, 47(05):660-666.
|
|
|
REN Hongqing, DONG Jiuzhi, MEI Baolong, et al.Research on compaction law and high precision control strategy of 3D four-directional C/C preform[J].Journal of Solid Rocket Technology,2024, 47(05):660-666
|
|
|
查柏林, 高勇, 王金金, 等. C/C复合材料在超声速富氧烧蚀环境下的烧蚀试验方法研究. 固体火箭技术, 2024, 47(01):87-98.
|
|
|
ZHA Bailin, GAO Yong, WANG Jinjin, et al.Ablation test method for C/C composites in supersonic oxygen-enriched ablation environment[J].Journal of Solid Rocket Technology,2024, 47(01):87-98.
|
|
|
寇钤芊, 张光喜, 陈意高, 等. 内压下轴编碳/碳复合材料喉衬细观结构与宏观应力状态的关联模型. 固体火箭技术, 2023, 46(05):770-778.
|
|
|
KOU Qianqian, ZHANG Guangxi, CHEN Yigao, et al.Correlation model of meso-scale structure and macro-scale stress state of axle-knitted C/C composites throat insert under internal pressure[J].Journal of Solid Rocket Technology,2023, 46(05):770-778.
|
|
|
张光喜, 吴小军, 刘明强, 等. 添加树脂碳对针刺C/C-SiC材料熔渗行为及性能的影响. 固体火箭技术, 2023, 46(03):474-481.
|
|
|
ZHANG Guangxi, WU Xiaojun, LIU Mingqiang, et al.Influence of adding resin carbon on infiltration behavior and performance of needle-punched C/C-SiC composites[J].Journal of Solid Rocket Technology,2023, 46(03):474-481.
|
|
|
成博, 弓站朋, 邓俊楷, 等. 针刺C/C复合材料拉伸强度预测的深度学习模型. 固体火箭技术, 2022, 45(06):851-859.
|
|
|
CHENG Bo, GONG Zhanpeng, DENG Junkai, et al.Deep learning prediction model for tensile strength of needle-punched C/C composites[J].Journal of Solid Rocket Technology,2022, 45(06):851-859.
|
|
|
成博, 弓站朋, 邓俊楷, 等. 针刺C/C复合材料结构-工艺-性能一体化软件平台. 固体火箭技术, 2022, 45(05):807-814.
|
|
|
CHENG Bo, GONG Zhanpeng, DENG Junkai, et al.Structure-process-performance integrated software platform for needled C/C composite[J].Journal of Solid Rocket Technology,2022, 45(05):807-814.
|
|
|
张晨鸽, 欧阳海波, 李翠艳, 等. 水热共沉积-碳热还原反应法制备的C/C-CuNi复合材料微观结构及性能. 固体火箭技术, 2022, 45(05):756-763.
|
|
|
ZHANG Chenge, OUYANG Haibo, LI Cuiyan, et al.Microstructure and properties of C/C-CuNi composites prepared by hydrothermal co-deposition and carbothermal reduction reaction process[J].Journal of Solid Rocket Technology,2022, 45(05):756-763.
|
|
|
吴小军, 杨杰, 杨云鹏, 等. 细编穿刺C/C喉衬材料烧蚀微结构及损伤机理. 固体火箭技术, 2022, 45(04):594-600.
|
|
|
WU Xiaojun, YANG Jie, YANG Yunpeng, et al.Ablative microstructure and damage mechanism of the fine weave pierced C/C throat material[J].Journal of Solid Rocket Technology,2022, 45(04):594-600.
|
|
|
董继杰, 李翠艳, 欧阳海波, 等. C/C-SiC-ZrC-Al2O3复合材料的制备及抗烧蚀性能研究. 固体火箭技术, 2022, 45(03):438-445.
|
|
|
DONG Jijie, LI Cuiyan, OUYANG Haibo, et al.Preparation and ablation resistance of C/C-SiC-ZrC-Al2O3 composites[J].Journal of Solid Rocket Technology,2022, 45(03):438-445.
|
|
|
朱世步, 刘津生, 闫联生, 等. 液态聚碳硅烷制备C/C-SiC复合材料抗烧蚀性能研究. 固体火箭技术, 2022, 45(01):121-127.
|
|
|
ZHU Shibu, LIU Jinsheng, YAN Liansheng, et al.Anti-ablation property of C/C-SiC composite prepared by precursor infiltration and pyrolysis using liquid polycarbosilane[J].Journal of Solid Rocket Technology,2022, 45(01):121-127.
|
|
|
梅宗书, 范学领, 石成英, 等. 改性C/C-ZrC-SiC复合材料热化学烧蚀数值分析. 固体火箭技术, 2021, 44(03):390-398.
|
|
|
MEI Zongshu, FAN Xueling, SHI Chengying, et al.Numerical simulation of thermo-chemical ablation of the C/C-ZrC-SiC composites[J].Journal of Solid Rocket Technology,2021, 44(03):390-398.
|
|
|
王玲玲, 冯雁, 刘苏骅, 等. 针刺C/C-SiC复合材料薄壁圆筒弯曲性能研究. 固体火箭技术, 2021, 44(04):506-512.
|
|
|
WANG Lingling, FENG Yan, LIU Suhua, et al.Bending performance of the needled C/C-SiC composites thin-walled cylinder[J].Journal of Solid Rocket Technology,2021, 44(04):506-512.
|
|
|
薛朋飞, 张光喜, 崔红, 等. C/C-ZrC-Cu复合材料的微观结构与抗烧蚀性能. 固体火箭技术, 2021, 44(01):96-105.
|
|
|
XUE Pengfei, ZHANG Guangxi, CUI Hong, et al.Microstructure and anti-ablation performance of C/C-ZrC-Cu composites[J].Journal of Solid Rocket Technology,2021, 44(01):96-105.
|
|
|
解静, 孙国栋, 李辉, 等. SiC对C/C-ZrC-SiC复合材料的微观形貌、烧蚀及热物理性能的影响. 固体火箭技术, 2020, 43(03):333-339.
|
|
|
XIE Jing, SUN Guodong, LI Hui, et al.Effects of SiC addition on the microstructure,ablative and thermophysical properties of C/C-ZrC-SiC composites[J].Journal of Solid Rocket Technology,2020, 43(03):333-339.
|
|
|
魏坤龙, 史宏斌, 李江, 等. 考虑孔隙缺陷三维编织C/C复合材料渐进损伤及强度预测（英文）. 固体火箭技术, 2020, 43(04):447-457.
|
|
|
WEI Kunlong, SHI Hongbin, LI Jiang, et al.Progressive damage simulation and tensile strength prediction of three-dimensional braided C/C composites considering void defects[J].Journal of Solid Rocket Technology,2020, 43(04):447-457.
|
|
|
虎琳, 王坤杰, 张宏亮, 等. 低密度C/C隔热材料快速低成本制备及性能研究. 固体火箭技术, 2020, 43(01):72-77.
|
|
|
HU Lin, WANG Kunjie, ZHANG Hongliang, et al.Research on the rapid and low cost preparation and properties of low density C/C thermal insulation material[J].Journal of Solid Rocket Technology,2020, 43(01):72-77.
|
|
|
邓恒, 刘豪, 严鸥鹏, 等. 石墨/AlSi耗散防热材料喉衬烧蚀试验研究. 固体火箭技术, 2020, 43(01):66-71.
|
|
|
DENG Heng, LIU Hao, YAN Oupeng, et al.Experimental study on ablation of graphite/AlSi dissipative thermal-protective composite throat insert[J].Journal of Solid Rocket Technology,2020, 43(01):66-71.
|
|
|
刘雪, 欧阳海波, 李翠艳, 等. 烧结温度对C/C-ZrC-SiC复合材料性能的影响. 固体火箭技术, 2020, 43(03):326-332.
|
|
|
LIU Xue, OUYANG Haibo, LI Cuiyan, et al.Effect of sintering temperature on mechanical performance and ablation resistance of C/C-ZrC-SiC composites[J].Journal of Solid Rocket Technology,2020, 43(03):326-332.
|
|
|
田蔚, 白侠, 郭春园. C/C-SiC-HfB2多元陶瓷基复合材料烧蚀机理分析. 固体火箭技术, 2019, 42(06):724-729.
|
|
|
TIAN Wei, BAI Xia, GUO Chunyuan, et al.Oxidation ablation resistance mechanism of C/C-SiC-HfB2 composite[J].Journal of Solid Rocket Technology,2019, 42(06):724-729.
|
|
|
张哲, 赵鹏, 孙国栋, 等. 酚醛树脂溶液浓度对液相浸渍-碳化法制备C/C复合材料浸渍效率的影响. 固体火箭技术, 2019, 42(06):771-778.
|
|
|
ZHANG Zhe, ZHAO Peng, SUN Guodong, et al.Effect of concentration of phenolic resin on impregnation efficiency of carbon/carbon composites prepared by liquid impregnation-carbonization method[J].Journal of Solid Rocket Technology,2019, 42(06):771-778.
|
|
|
王玲玲, 王坤杰, 虎琳, 等. C/C-SiC的高温裂解温度对C/C-SiC-ZrC复合材料制备及性能的影响. 固体火箭技术, 2019, 42(05):635-641.
|
|
|
WANG Lingling, WANG Kunjie, HU Lin, et al.Effect of pyrolysis temperature of C/C-SiC on preparation and properties of the C/C-SiC-ZrC composites[J].Journal of Solid Rocket Technology,2019, 42(05):635-641.
|
|
|
王坤杰, 姚冬梅, 崔红, 等. 液体火箭发动机喷管延伸段C/C-SiC复合材料的性能. 固体火箭技术, 2019, 42(04):506-512.
|
|
|
WANG Kunjie, YAO Dongmei, CUI Hong, et al.Performances of C/C-SiC composites for the nozzle extension of liquid rocket engines[J].Journal of Solid Rocket Technology,2019, 42(04):506-512.
|
|
|
康文杰, 薛如月, 赵大明, 等. 反应熔渗工艺制备的C/C-SiC复合材料烧蚀性能及构件研制. 固体火箭技术, 2019, 42(04):519-522+552.
|
|
|
KANG Wenjie, XUE Ruyue, ZHAO Daming, et al.Component development and ablation properties of C/C-SiC composites prepared with RMI process[J].Journal of Solid Rocket Technology,2019, 42(04):519-522+552.
|
|
|
林志远, 邢会华, 侯晓, 等. 针刺C/C复合材料高温力学性能试验及本构关系（英文）. 固体火箭技术, 2019, 42(01):98-104.
|
|
|
LIN Zhiyuan, XING Huihua, HOU Xiao, et al.High-temperature mechanical properties testing and constitutive relation of needle-punched C/C composite[J].Journal of Solid Rocket Technology,2019, 42(01):98-104.
|
|
|
王坤杰, 张小会, 吴小军, 等. C/C-SiC防热材料快速制备及其性能研究真. 固体火箭技术, 2018, 41(06):754-759.
|
|
|
WANG Kunjie, ZHANG Xiaohui, WU Xiaojun, et al.Fast fabrication and properties of C/C-SiC thermal insulation composites[J].Journal of Solid Rocket Technology,2018, 41(06):754-759.
|
|
|
解静, 孙国栋, 李辉. CVD-SiC涂层封孔处理后C/C-ZrC-SiC复合材料的烧蚀行为. 固体火箭技术, 2018, 41(06):772-777+786.
|
|
|
XIE Jing, SUN Guodong, LI Hui, et al.Ablation behavior of C/C-ZrC-SiC composites after surface sealing by CVD-SiC coating[J].Journal of Solid Rocket Technology,2018, 41(06):772-777+786.
|
|
|
朱昭君, 强洪夫. 基于均匀化理论的4D轴编C/C复合材料的细观力学性能预测. 固体火箭技术, 2019, 42(01):92-97+104.
|
|
|
ZHU Zhaojun, QIANG Hongfu.Forecast research on micromechanical properties of 4D in-plane C/C composites basedon homogenization theory[J].Journal of Solid Rocket Technology,2019, 42(01):92-97+104.
|
|
|
郭晨, 孙润军, 王剑锋. 树脂补增密前后C/C复合材料在不同制动压力下的摩擦学性能. 固体火箭技术, 2018, 41(04):514-519.
|
|
|
GUO Chen, SUN Runjun, WANG Jianfeng, et al.Tribological properties of carbon/carbon composites without and with resin post-densification under different braking pressure[J].Journal of Solid Rocket Technology,2018, 41(04):514-519.
|
|
|
宋永善, 齐乐华, 张守阳, 等. C/C复合材料微观尺度烧蚀过程质量损失速率模拟. 固体火箭技术, 2018, 41(03):363-368.
|
|
|
SONG Yongshan, QI Lehua, ZHANG Shouyang, et al.Simulation on mass loss of C/C composites ablation with fiber scale[J].Journal of Solid Rocket Technology,2018, 41(03):363-368.
|
|
|
梅宗书, 石成英, 吴婉娥. C/C复合材料抗氧化性能研究进展. 固体火箭技术, 2017, 40(06):758-764+769.
|
|
|
MEI Zongshu, SHI Chengying, WU Wane, et al.Advances in ablation thermal protection of C/C composites[J].Journal of Solid Rocket Technology,2017, 40(06):758-764+769.
|
|
|
陈天宇, 史宏斌, 唐敏, 等. 基于Jones-Nelson本构模型的C/C复合材料喉衬变形研究. 固体火箭技术, 2017, 40(04):414-419.
|
|
|
CHEN Tianyu, SHI Hongbin, TANG Min, et al.Analysis of C/C composites throat distortionbased on the Jones-Nelson constitutive model[J].Journal of Solid Rocket Technology,2017, 40(04):414-419.
|
|
|
梁珩, 童明波, 王玉青, 等. 细编穿刺C/C复合材料热导率数值模拟. 固体火箭技术, 2017, 40(03):364-371+379.
|
|
|
LIANG Heng, TONG Mingbo, WANG Yuqing, et al.Simulation on effective thermal conductivity of fine weave pierced C/C composite[J].Journal of Solid Rocket Technology,2017, 40(03):364-371+379.
|
|
|
李耿, 王周成, 生志斐, 等. C/C扩张段典型连接结构热应力对比分析及试验研究. 固体火箭技术, 2017, 40(03):289-294.
|
|
|
LI Geng, WANG Zhoucheng, SHENG Zhifei, et al.Comparative analysis of thermal stress and test research for C/C divergent section with typical connecting structure[J].Journal of Solid Rocket Technology,2017, 40(03):289-294.
|
|
|
郑金煌, 李贺军, 崔红, 等. 针刺预制体参数对C/C复合材料力学性能的影响（英文）. 固体火箭技术, 2017, 40(02):221-227.
|
|
|
ZHENG Jinhuang, LI Hejun, CUI Hong, et al.Effect of needle-punched preform parameters on the mechanical properties of carbon/carbon composites[J].Journal of Solid Rocket Technology,2017, 40(02):221-227.
|
|
|
汪海滨, 李鑫. 轴编C/C复合材料喉衬的多尺度烧蚀分析方法. 固体火箭技术, 2017, 40(03):295-301.
|
|
|
WANG Haibin, LI Xin.Multiscale approach to ablation modeling of in-plain C/C composite for nozzle throat[J].Journal of Solid Rocket Technology,2017, 40(03):295-301.
|
|
|
吴小军, 杨杰, 周绍建, 等. C/C喉衬近净尺寸制备及性能. 固体火箭技术, 2017, 40(02):228-231+249.
|
|
|
WU Xiaojun, YANG Jie, ZHOU Shaojian, et al.Near net-shape fabrication and properties of C/C throat[J].Journal of Solid Rocket Technology,2017, 40(02):228-231+249.
|
|
|
杨星, 赵景鹏, 崔红, 等. 不同双元陶瓷基体对改性C/C复合材料性能的影响. 固体火箭技术, 2016, 39(06):820-824+832.
|
|
|
YANG Xing, ZHAO Jingpeng, CUI Hong, et al.Effects of different dual ceramic matrix on properties of modified C/C composites[J].Journal of Solid Rocket Technology,2016, 39(06):820-824+832.
|
|
|
王毅, 郑金煌, 崔红, 等. 针刺预制体纤维排布对C/C复合材料力学性能影响. 固体火箭技术, 2016, 39(03):388-391+396.
|
|
|
WANG Yi, ZHENG Jinhuang, CUI Hong, et al.Influence of fiber arrangement of needled preform on mechanical properties of C/C composite[J].Journal of Solid Rocket Technology,2016, 39(03):388-391+396.
|
|
|
孙国栋, 李辉, 邓娟利. SiC涂层制备工艺对C/C复合材料微观结构及性能的影响. 固体火箭技术, 2016, 39(01):100-105.
|
|
|
SUN Guodong, LI Hui, DENG Juanli, et al.Effect of preparation process of SiC coating on the microstructure and properties of C/C composites[J].Journal of Solid Rocket Technology,2016, 39(01):100-105.
|
|
|
严博燕, 生志斐, 李耿, 等. 一种基于神经网络与粒子群算法辨识针刺炭/炭复合材料弹性常数的方法. 固体火箭技术, 2016, 39(01):106-110.
|
|
|
YAN Boyan, SHENG Zhifei, LI Geng, et al.Inverse method based on neural network and particle swarm optimization for characterizing the C/C material elastic constants[J].Journal of Solid Rocket Technology,2016, 39(01):106-110.
|
|
|
许承海, 徐德昇, 宋乐颖, 等. 2D C/C复合材料超高温压缩性能试验研究. 固体火箭技术, 2015, 38(06):860-864.
|
|
|
XU Chenghai, XU Desheng, SONG Leying, et al.Experimental investigation on compressive properties of 2D C/C composites at ultra-high temperature[J].Journal of Solid Rocket Technology,2015, 38(06):860-864.
|
|
|
陈振, 方国东, 谢军波, 等. 三维轴编C/C复合材料双向拉伸实验研究. 固体火箭技术, 2015, 38(02):267-272.
|
|
|
CHEN Zhen, FANG Guodong, XIE Junbo, et al.Experiment investigation on biaxial tensile strength of 3D in-plane braided C/C composites[J].Journal of Solid Rocket Technology,2015, 38(02):267-272.
|
|
|
周绍建, 吴小军, 崔红, 等. 石墨粉对LSI法制备C/C-SiC复合材料性能的影响. 固体火箭技术, 2015, 38(02):281-285.
|
|
|
ZHOU Shaojian, WU Xiaojun, CUI Hong, et al.Influence of graphite filler on the performance of C/C-SiC composites based on LSI[J].Journal of Solid Rocket Technology,2015, 38(02):281-285.
|
|
|
解惠贞, 崔红, 李瑞珍, 等. 穿刺结构参数对C/C复合材料拉伸性能的影响. 固体火箭技术, 2015, 38(01):107-110+129.
|
|
|
XIE Huizhen, CUI Hong, LI Ruizhen, et al.Influence of punctured structure parameterson tensile performance of C / C composite[J].Journal of Solid Rocket Technology,2015, 38(01):107-110+129.
|
|
|
孟松鹤, 党晓雪, 丁小恒, 等. 多孔C/C材料发汗冷却实验研究. 固体火箭技术, 2015, 38(01):102-106.
|
|
|
MENG Songhe, DANG Xiaoxue, DING Xiaoheng, et al.Transpiration cooling tests of porous C / C[J].Journal of Solid Rocket Technology,2015, 38(01):102-106.
|
固体火箭技术