Grateful for your long-term support! CHINAPLAS 2026 will kick off at National Exhibition and Convention Center (NECC) Shanghai from April 21 to 24. FUDL sincerely invites you to visit our booth 8.1C12 to explore the latest blow-molding technology and innovative solutions. We look forward to face-to-face communication and win-win cooperation with you!
📍 展位定位 | Booth Location
🚗 观展路线指南 | Route Guide
1. 地铁直达（最推荐）| Subway (Most Recommended)
线路 / Line：地铁 2 号线 / 17 号线 → 国家会展中心站 | Metro Line 2/17 → National Exhibition and Convention Center Station
2 号线出口 / Exit 2：4、5、6 号口出站 → 步行至西登录厅，步行约 2 分钟直达 8.1 馆 | Exit 4, 5 or 6 → Walk to West Hall, 2-min walk to Hall 8.1
17 号线出口 / Exit 17：15 号口出站 → 步行至北登录厅，沿指示牌直达 8.1 馆 | Exit 15 → Walk to North Hall, follow signs to Hall 8.1
入场步骤 / Entry Steps：安检入场 → 沿 4 号门 / 7 号门指示牌步行，直达 8.1 馆入口 | Security Check → Walk to Gate 4/Gate 7, direct entrance to Hall 8.1
2. 自驾 / 打车 | Self-driving/Taxi
导航定位 / Navigation：上海国家会展中心（崧泽大道 333 号）| NECC Shanghai (No. 333 Songze Avenue)
推荐入口 / Recommended Entrance：10 号门（北广场）/18 号门（西广场）| Gate 10 (North Square)/Gate 18 (West Square)
入场后路线 / Route After Entry：北广场→往 4 号门步行直达；西广场→直接步行至 8.1 馆 | North Square → Walk to Gate 4; West Square → Direct walk to Hall 8.1
温馨提示 / Warm Tip：展会人流车流较大，建议绿色出行，预留 15-20 分钟停车及步行时间 | Large passenger flow during the exhibition. Green travel is recommended, reserve 15-20 mins for parking and walking.
3. 馆内穿梭（从其他馆过来）| Inter-hall Shuttle (From Other Halls)
免费班车 / Free Shuttle：4 号馆、7 号馆附近站点乘车，直达 8.1 馆区域 | Shuttle bus stops near Hall 4/Hall 7, direct to Hall 8.1 area.
步行路线 / Walking Route：4.1 馆→沿通道向西直走；7.1 馆→向南 / 向西步行；南 / 北登录厅→下至一层，按 4 号门指示步行 | Hall 4.1 → Walk west along corridor; Hall 7.1 → Walk south/west; South/North Hall → Go to 1st floor, follow Gate 4 signs
4. 快速定位 / Quick Positioning
8.1 馆位于展馆一层西侧，紧邻 4 号门、7 号门，现场中英文指示牌清晰指引 | Hall 8.1 is on the west side of the 1st floor, next to Gate 4 and Gate 7. Clear Chinese-English signs on site.
🌟 展位亮点 | Booth Highlights
• 核心设备展示：FUDL六模高速旋转吹塑机及配套辅机，覆盖多场景生产需求 | FUDL Six-Mold High-Speed Rotational Blow Molding Machine and supporting auxiliary equipment, covering production needs of multiple scenarios.
• 技术升级解读：多层材料适配方案与高效生产技术解析 | Technical Upgrade Interpretation: Multi-layer Material Adaptation Solutions and Analysis of High-Efficiency Production Technology.
• 专属商务洽谈：专业团队一对一解答设备参数、定制化、国际贸易等问题 | Dedicated team for one-on-one communication on equipment parameters, customization and international trade.
福德隆 8.1C12 展位，期待与您相遇，共塑未来！
FORDLONG at Hall 8.1C12, looking forward to meeting you!
广东三庆智能科技有限公司：
广东佛山顺德区
河北三庆机械制造有限公司：
河北沧州高新区
河北三庆智能装备有限公司：
河北沧州高新区