点击蓝字 关注我们
广州誉本液压科技有限公司
Guangzhou Yuben Hydraulic Technology Co., Ltd.
Our goal is let the friend that buys crimping machine use good crimping machine.
Since 2012, we are continuous improvement of production process, upgrading of production equipment such as MAZAK lathe and MAZAK gantry machining centers and testing equipment HEXAGON three-coordinate measuring machine, thus the size of machine parts is more accurate and the quality is more stable.
After years of product design, research and development, has accumulated rich experience in production, Yuben mahine is easier to use and more humanized. Each machine has been carefully tested to ensure the high quality and high stability.
我们的目标是让购买压管机的朋友用上好的压管机。
自2012年以来，我们不断改进生产工艺，升级MAZAK车床、MAZAK龙门加工中心等生产设备和检测设备HEXAGON三坐标测量机，使机器零件尺寸更精准，质量更稳定。
经过多年的产品设计、研发，积累了丰富的生产经验，誉本机器使用更方便，更人性化。每台机器都经过仔细测试，确保高质量和高稳定性。
About Us 关于我们
1. PRODUCING WORKSHOP 生产车间
2. QUALITY CONTROL 质量控制
Assembling 组装
CNC Machining Center
数控加工中心
SWIPE TO CHECK MORE
Processing Equipment 加工设备
More
Finished Material 成品材料
Detection Part 检测部分
3. PRODUCTS 产品
Crimping Machine 压管机
YB-P16HP
P16HP is hand pump operated hydraulic crimping machine for repair workshops and field use. Easy to use, light and compact in size, allowing to be carried to any location.
P16HP 是手动泵操作的液压压管机，适合维修车间和现场使用。使用便捷、重量轻、尺寸紧凑，可随身携带到任何地方。
YB-P20CS
Yuben P20CS hose-crimping machine has been designed to crimp up to 1 1/2” diameter 2-spiral hoses or 1 1/4" 4 SH. And for car-service use. It is fast and easy to use. CS machines are battery powered with 12V or 24V.
誉本P20CS 软管扣压机设计用于扣压直径最大为1 1/2" 2层或 1 1/4" 4层。并且适合汽车维修使用，快速且易于使用。CS 机器电池供电为12V或24V。
YB-P32D
P32D hose-crimping machine has been designed to crimp up to 2” diameter4-spiral hoses. And for workshop use. It is fast and easy to use. Control by CNC system.
P32D 软管扣压机设计用于扣压直径达 2 寸4 层，并供车间使用。它快速且易于使用，由数控系统控制。
Cutting And Skiving 切割和剥胶
YB-C300
Yuben C300 hose-cutting machine has been designed to cut up to 2” diameter 4-spiral hoses. And for workshop use. It is manually operated and easy to use.
誉本C300 软管切割机设计用于切割直径达 2 寸4层，并供车间使用。手动操作，使用便捷。
YB-S50
Yuben S50 hose-skiving machine has been designed to skive hydraulic hoses from diameter 3/16" to 2". For workshop use.
誉本S50 软管切割机设计用于切割直径从 3/16" 到 2" 的液压软管。供车间使用。
扫码关注我们
