HB-460智能双头圆角机- 大数跨境

首页

HB-460智能双头圆角机

东莞市恒博装订设备有限公司

2024-11-27

导读：圆角机采用PLC程序控制，高清触控显示屏，圆角效果精准，调刀换款方便。

机器介绍

操作流程:Working process:

1、手动不间断放料。Feed the book by manual.

2、自动前后对位拍齐。Push the book automatically.

3、自动右侧靠中对产品形成四面拍紧,双刀同下冲切纸品两边的圆角。Push the book from right side to make sure all four side has been push tightly, then the cutter willgo down to cut.

4、切圆角完成自动退回到平台位置,左侧推手推出产品,随右侧滚珠板送到收料架。After cutting and push part will also go back to origin position, then the lef push part will pushthe finished book to the belt.

智能双头圆角机优势:The advantage of the machine:

一、本圆角机自动对位推齐-自动切两边圆角-自动退出收料，无需人工对位推紧，比普通圆角机提高双倍生产效率，This machine can push the book automatically,cutting the corner automatically,push the finished bookaway automatically,which will improve the efficiency twice than normal cutting machine.

二、圆角机采用PLC程序控制，高清触控显示屏，圆角效果精准，调刀换款方便。This machine is control by PlC, touch screen,can cut the round corner very well,easy to change the cutter

三、特制高精度圆角刀，采用铬钢底刀工艺，切口平整无残存，没有最底下一张纸切不透的情况，经久耐用，圆弧流畅刀口齐整。

This machine use the special highaccuracy cutter. which use the technology of chromium steel for bottomcutter, it will not have the situation of bottom paper can not cut

产品展示：