HB-340全自动双头圆角机(可直接连三面切书机)- 大数跨境

首页

HB-340全自动双头圆角机(可直接连三面切书机)

东莞市恒博装订设备有限公司

2025-02-18

导读：联机三面切书机同步同频自动切圆角，只需要在收料平台端接收成品，比传统工艺节省3-4名人工同时节省圆角区半成品码放空间。

机器介绍

全自动双头圆角机优势:The advantage of the machine:

1、联机三面切书机同步同频自动切圆角，只需要在收料平台端接收成品，比传统工艺节省3-4名人工同时节省圆角区半成品码放空间，节省厂房，大大提生产效率。

The machine can conect with three-knife cutting machine, it will just need receive the book from the receivebelt of three-knife cutting machine,can save 3-4 workers than traditional,at the same time it can also savethe space for half-product of book which are going to wait to cut.

2、圆角机采用伺服电缸加PLC程序控制，圆角定位精准，输出更稳定。mhe mchine use the double servocvlinder and Plc control,can cut the corner more accurate and more stable output.

3、高清触控显示屏，调机便捷，调刀换款方便特制高精度圆角刀，采用铬钢底刀工艺，切口平整无残存，没有最底下一张纸切不透的情况，经久耐用，圆弧流畅刀口齐整。Touch screen,easy to adjust,easy tochange the cutter.This machine use the special high=accuracy cutter, which use the technology of chromium steelfor bottom cutter,it will not have the situation of bottom paper can not cut well.

产品展示：

操作流程

操作流程：Working process:

1、无缝连接三面切书机出料端或通过送料带输送进料。Connect with the received belt of the three-knife cutting machine or through a feed belt to feed the book.

2、中间通过上下皮带夹紧书本送料到冲切位置。The book will move forward to cutter position through the belt.

3、冲切位感应区感应到纸品，后端自动向前推紧，左右刀头靠中推紧，对纸品形成前后左右四面推齐之势双刀头同时下切，切角完成刀头复位，成品自动送出。

The cutting position wil sensor the book,then the back push parts will push the book tightly,then the left and right cutter will move to the middle position to push the book tightly,to make sure all four side of the book has been push tightly,then the double cutter will cut the book at the same time.after that the cutter will back to the origin position,then the finished book will be push out.

4、上下皮带夹紧产品送出主机落到收料架。The belt will deliver the finished book to the receive belt.