超薄型汽车内饰无无碱短切毡E-glass Light Weight Chopped Strand Mat For Automobile Inner Headliner
超薄型汽车内饰无碱毡是由高分束无碱玻璃纤维合股无捻粗纱短切后，随机无定向均匀平铺，然后用环保型粘结剂粘合在一起，制成均匀无序交接的连续性毡片
E-glass Light Weight Chopped Strand Mat are an unwoven fabric consisting of randomly distributed chopped strands held together with binder.
适用树脂和产品compatible resins and applications
本产品主要应用于聚氨酯树脂。
可适用于增强不饱和聚酯树脂、乙烯基树脂、环氧树脂、酚醛树脂等。
超薄型汽车内饰无碱毡主要用于汽车顶棚，提高汽车顶棚的刚性及聚酯发泡膜的粘结强度，具有优良的工艺性能，在满足顶棚的机械物理性能的同时降低汽车重量。
E-glass Light Weight Chopped Strand Mat are mainly used in polyurethane resin.
E-glass Light Weight Chopped Strand Mat are compatible with unsaturated polyester,vinyl ester,epoxy and phenolic resins.
The products are most widely used in automobile inner headliners with any width less than 3.6meters,improve it’s stiffness and bond strength of Polyurethane foam film.The products have excellent process performance,it can lower the weight of automobile based on meet the mechanical and physical for headliners.
产品特点Product Features
1、单位面积质量均匀,保证了制品的玻璃纤维含量和力学性能稳定,提高了与聚氨酯的结合力。
2、毡片粘结剂分布均匀，产品具有高强度的性能,同时使也的毡的连续长度增加。
3、毡层的结构使也具有优良的柔韧性.快速的异形贴膜性，异形角度不回弹。
4、树脂浸穿、浸透快且速度一致,满足产品对树脂的吸附量，提高制品的力学性能及工作效率。
5、制品干、湿态强度高,尺寸的稳定性好.
1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
2.Uniform powder distribution ensures high strength and increase the length of mat.
3.Excellent flexibility ensures good moldability with no springback at sharp angles.
4.Fast and consistent wet-out speed in resins and meet the requirement of resin consumption and enhance productivity and mechanical properties of the end products.
5.The composite products have high dry and wet tensile strength and good transparency.
技术指标Technical Parameters
性能 Property |
单位面积质量 |
含水率 |
可燃物含量 |
断裂强度 |
幅宽 |
测试方法 |
ISO3374 |
ISO3344 |
ISO1887 |
ISO3342 |
ISO5025 |
EMC60 |
±5 |
≤0.20 |
12—16 |
≥70 |
±5 |
EMC80 |
±5 |
≤0.20 |
12—16 |
≥80 |
±5 |
EMC100 |
±5 |
≤0.20 |
10—13 |
≥100 |
±5 |
EMC120 |
±5 |
≤0.20 |
8—12 |
≥120 |
±5 |
注：超薄型汽车内饰无碱短切毡，产品幅宽范围200mm-3600mm，可根据客户特殊要求，提供不同浸透和分解时间的产品。
Note:E-glass Light Weight Chopped Strand Mat are available with a width range of 200mm~3600mm，Other specifications are also available on customer request.
包装及储存说明Packaging＆Storage
超薄型汽车内饰无碱毡缠绕在内径79mm、90mm或106mm的纸管上，按照产品要求可做成200米/卷、300/卷、500米/卷，用塑料防潮袋包扎，外用纸箱或牛皮纸包装，垂直或水平放置；装入集装箱时可散装也可用托盘包装托盘包装。
Each chopped strand mat is wound onto a paper tube which has an inside diameter of 79mm，90mm or 106mm.The products can be made in 200m/roll or 500m/roll according To custom request.
在没特殊要求的情况下，超薄型汽车内饰无碱毡储存在干燥凉爽的地方防止雨淋。建议储存控制温度15℃一35℃'湿度35%-65%.为了确保产品安全、避免损坏产品，托盘的堆码高度不超过两层；无托盘水平放置不超过4层
Unless otherwise specified，E-glass chopped strand mat should be stored in a dry.cool and rain-proof area.it is recommended that the temperature and humidity should be always maintained at 15℃~35and 35%-65%respectively.To ensure safety and avoid damage to the product,the pallets should not be stacked more than two layers.Any package without pallet should not be stacked horizontally more than four layers.