【询盘分享】您有六封优质的询盘等待报价→ 请点击查看- 大数跨境

CERADIR先进陶瓷在线

2023-06-07

导读：CERADIR 优质询盘来啦！免费注册以开通询盘自动邮件通知

1号询盘：

询盘内容	Tantalum powder 3N5 purity, -200mesh, could you please reply my email for details?
买家姓名	Curley Khoo
公司	Oryx Advanced Materials Sdn Bhd
国家	马来西亚
邮箱	curley.khoo@oryxadv.com

链接：https://ceradir.com/buyer-quotes/rfq-detail?id=289

2号询盘：

询盘内容	We’ve got an inquiry for “ceramic plate “which you can find the related specifications enclosed. Please mind issuing your offer at your first convenience.
买家姓名	Max
公司	Stellar Process Solutions LLC (SPS)
国家	阿曼
邮箱	max@stellar-om.com

链接：https://ceradir.com/buyer-quotes/rfq-detail?id=290

3号询盘：

询盘内容	Good afternoon! We are interested in aluminum oxide ceramic substrates. We are interested in dielectric permittivity, bending strength, transparency, water absorption, apparent density, temperature coefficient of linear expansion, thermal conductivity, tangent of the dielectric loss angle, specific volumetric electrical resistance, roughness of the polished surface, roughness of the polished surface.
买家姓名	Ирина Дурандина
公司	/
国家	俄罗斯
联系	durandina.i.s@yandex.ru

链接：https://ceradir.com/buyer-quotes/rfq-detail?id=291

4号询盘：

询盘内容	Dear Madam / Sir, I got info about your company from Mr. Pascale Couture, who contacted you some time ago regarding the search for alternative supplier for one of the key components used in the probes we are manufacturing in our plant Sosnowiec, Poland – the Zirconia tip. I’d like you to look at the attached drawing which trial batch we want to order (5-10pcs.). A few notes regarding the working conditions and our requirements for quality control: This is a measuring component. Not only its mechanical properties are important, but also the quality of the base material (Yttria stabilized Zirconia MZ429). The part is working in an oxygen probe. The working temperature is approx.. 930°C. It is exposed to thermal shock. We test the complete probes in a furnace which is heat up to 800-900°C. The probe is inserted fast into the furnace, so we are talking about switching from room temperature to furnace temperature in a matter of seconds. We are using dye-test on incoming inspection to verify the parts for potential cracks which disqualify it for further use. We would like you to implement this step in your end control to ensure we are receiving 100% crack-free deliveries. The laser print which is called-upon on the drawing is for traceability. If you prefer a different method then we are open for discussion, but we need the parts to be marked. Our current supplier uses for example AA001-AA100 (lot AA, 100pcs. in lot). It may be something similar, but we must be able to differentiate between suppliers. Let me know if you require further info. If everything is clear, please provide an offer for the prototype lot. Hoping to hear from you soon.
买家姓名	Marcin Szmajduch
公司	UPC MARATHON
国家	波兰
联系方式	+48 500 271 815 marcin.szmajduch@upc-marathon.com